Using an Ambient Temp Probe to check
Drum Smoking Big Poppa Smokers
The West Coast Offense
Loyalty Program
Using an Ambient Temp Probe to check
Results 1 to 4 of 4

Thread: Using an Ambient Temp Probe to check

  1. #1

    Using an Ambient Temp Probe to check

    Folks,

    I'm a bit OCD about checking to see if my MAK's setpoint and PB measured temps are "correct". I confess I do this for my home oven, my other smokers/grill/etc. I have a Fireboard 6 port wifi temp monitor, a Maverick XR-50 4 port temp monitor and a Thermoworks IR gun with an ambient K-probe. To tell the truth, it drives me a bit crazy, but I always want to know if my food is smoking/cooking at the temp I want, whether low or high heat. Of course testing the food's internal temp (IT) is the BEST way to measure "doneness", so this is really about desired cook temperature.

    Do you separately monitor the ambient temp? Do you adjust the setpoint based on this, or just stay with the Pellet Boss setting?


    I know MAK is working on an idea called a "roaming Thermo Couple" so that the TC can be placed closer to where the food is being smoked (see MAK DADDY's post on this). For example, I do a lot of smoking using the upper grate and this would allow placing the TC on the upper grate, thus providing temps to the Pellet Boss from beside the food up there versus the fixed location of back, lower left. Pretty great innovation in my opinion!
    --Sam

    MAK 2 Star #3634
    Weber Summit E450 gasser
    Blackstone 17" griddle

  2. #2
    Moderator scooter's Avatar
    Join Date
    Oct 2010
    Location
    SF Bay Area, CA
    Posts
    3,471
    I only monitor internal pit temps separately when competing with a 2 Star. In my backyard I go with what the TC says based on my knowledge of what temps I get at specific setpoints while I competed.
    That roaming TC is a GREAT idea!!!!!!
    - MAK owner for life! -
    2015 2 Star General prototype #0 with WiFi and beta FlashFire™ Ignition System
    2009 2 Star General #28
    2 BPS Engineered Drum Smokers, steel & stainless steel
    Smokin' Yankee's Competition BBQ Team
    CBBQA
    KCBS - MCBJ, CTC


  3. #3
    I have monitored the temps separate. The pellet boss is always in the ballpark. Like scooter we just cook with ours. The way a MAK cycles makes more smoke. With that the temps cycle a little to. Still less then our oven.
    MAK Grills ,BPS Drum Smoker, Ole Hickory Pits Ace BP, Hasty Bake Legacy KCBS CBJ

  4. #4
    Since I don't have the WiFi, the only time I use an extra probe is for overnight cooks to alarm me just in case, on the rare incident, the pit temp were to drop below 140° from a flame out.

    Otherwise, we basically just cook with ours too. I don't worry about a remote probe regarding temp differences between top/bottom, left/right, etc. The overall average from the PelletBoss has always worked well for us.

    I have to admit, though, the roaming temp controller is intriguing!
    <><
    MAK 1 Star General #651 - 2014 Model
    former owner - MAK 1 Star General #171
    22.5" Weber Performer with Stoven Pellet Grill attachment
    27 + year old 22.5" Weber Kettle (still works fine)
    Modified Horizontal Offset Smoker - used mainly for cold smoking.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •