The purpose is to measure the temperature in a specific spot in the grill vs the overall temp where the sensor is mounted in your grill. You don't need a new controller to use the Roaming TC but you...
Type: Posts; User: MAK DADDY
The purpose is to measure the temperature in a specific spot in the grill vs the overall temp where the sensor is mounted in your grill. You don't need a new controller to use the Roaming TC but you...
Thanks for buying an American Made MAK Grill, all of us here at MAK really appreciate your patronage!
We know you will love your grill for many years!
I put foil down over the grease pan for easier cleanup then smoke them right on the lower grate (unless smoking a bunch where I would need upper grates too).
The auger will turn continuously when set to grill mode and there is only one speed.
Contact us at MAK Grills and we will help you out :)
At the factory we place the lid on the grill in the closed position, then slide the bushing in from the opening using a wrench (or anything skinny) to hold it up until it aligns with the hole in the...
Any component can fail, the difference is the cartridge heaters (old igniter rod) failed from normal use where the Flash Fire will only fail if it is faulty (or touches the inside of the igniter...
The MAK Grills Family Story | MAK Grills - YouTub
Sorry for your frustrations, we are always improving our grills to make them as bulletproof as possible. The 1 Star today is miles ahead of the 1 Star from 7 years ago and we have invented many...
Great looking bird!!!
Yes the three star is a bit narrower as the hopper takes up room in the front of the grill where the 2 star has a side hopper.
Double the length though with lots of rack...
Please contact MAK Grills for support issues, we will get you taken care of!
Hi there this is a typo, it only applies to the Griddle. Because of the large flat surface of the griddle warping can occur at high temps.
Searing grates are fine to use at any grill temperature....
Good idea but magnets can't be welded and they do not last getting heated up and cooled constantly. Also our stainless is 304 series (non magnetic) so a magnet on the tool wouldn't work either. We...
No need to take off the flame zone covers for the griddle or other area your not direct grilling.
We recommend only moving the covers before starting a cook when the grill is cold. The covers are...
Yes, it is so the hole isn't openly exposed to the outside. We have never heard of that being an issue with probe cables as they are all stainless braided. As long as you don't close the lid on top...
Best pellets you can buy are BBQ Delight right here from BPS :)
I see, yes it will rise in temp much faster because the heat is being directed to the top cooking area much better than with the old system. You will be shocked at what a difference it makes not only...
The controller has a minimum motor time adjustment for lowering set points to keep the fire going while this is happening. This is the reason it takes a while to cool down to the new set point,...
No Problem, yes the ball will not do anything it just comes standard on that type of pin :)
Congrats on the 2 Star, you are going to love it!
Yes that is correct, we used to make it tighter but with the expansion and contraction of the metal in that area from all the heat they were...
We added this for UL requirements.
Serial number 2330 back in 2015.
Glad you are enjoying your MAK! See answers above in text.
Contact us after the holiday, we will get your MAK up and smoking again! It will be pellets, really no way for it to rust together as the tube is stainless steel and there is a lot of built in...
The 1 star will run around 170 on the smoke set point.
Welcome to the MAK Grills Family and thanks for buying American made, we really appreciate your patronage!
Rain should not cause an issue unless the grill has sat unused for weeks (pellets can draw moisture over time from the air like a sponge). You don't need to dump out your pellets after every cook...