• If you are a registered member of the PelletSmoking.com Forums and you are having trouble logging in, first try asking for a password reset on the login form. That should send a verification email to your registered email account. If you don't see it within 5-15 minutes, check your spam/junk folder. If you still can't log in, please use our Contact Form to send details and obtain assistance from staff. Once you are logged in, make sure that the "Stay logged in" box is checked so your session doesn't time out until you manually log out.

Pellet Boss firmware

MAK DADDY

Moderator
We here at MAK have continued to improve or update the firmware on the controllers for various reasons. We have an update module that will bring you to the latest version if you need it.

To check your version press and hold the "Select" button for 10 seconds; on the 2012+ 5 button control press and hold the "Up" arrow for 10 seconds.

V3.58 Added auto relight, adjusted pot overflow routine for heavy ash pellets.
V3.44 Adjusted motor times for new flame zone, disabled flare up alarm for grill setting, added TC adjustment, improved wi-fi dropping connection.
V3.2 Pot Overflow routine added to better manage smoke to high set point changes.
V3.0 New ignition sequence, hopper switch, web control default ON, maintenance screens updated.
V2.8 Hot start, auger sign and BT/Wi-Fi detection.
V2.3 Wi-Fi :)
V2.2 Fixed smoke temp from V2.1
V2.1 fixed power restart after flameout alarm on 5 button control
V2.0 Current 2012 Version, 5 button controller capable
V1.9 No user changes
V1.8 Current 2011 Version, fixed user program error on steps 4&5 (works on steps 1-3)
V1.7 No user changes
V1.6 No user changes
V1.5 Added M1 Armored Probe selection (we no longer offer this probe)
V1.4 Bluetooth ready boards, added 2 User program steps.
V1.3 Added "Standard" Probe (we stopped offering the cdn probe)
V1.2 Production Release
 
Last edited:

SmokinKat

New member
Good morning Smokingdents! No, you don't have to buy the remote boss to get the current firmware version.

If you're registered your grill with us, we can send you an update module to get the program updated. However, there is currently a waiting list for the update modules, so it might be a few weeks before we can get one to you. The quicker option would be to send us your Pellet Boss board with a note that you'd like to be updated, we can update the software here, and send it back to you the next day.

Just give us a call (503-623-1234) or drop us an email ([email protected]), and we can get you on the list for an update or give you more instructions for getting your Pellet Boss to us!
 
Top Bottom