Several folks (well, at least one person!) asked me to post photos when I got the Traeger installed in our RV. Took the grill to the RV today to see if it would work as planned. It fit perfectly - and there is a 110 V. outlet on the inside wall to the left of the grill. Plenty of clearance between the grill and the side of the rig, but it is a bit tight on the right by the door. I'll put concrete board under the grill, leaving clearance under the pellet hopper for air induction, and may use a piece to protect the door if needed. For now the grill goes back home for more "testing."